Anaerobic gasket sealant is designed for specific performance requirements of gasketing(gasket) applications. It improves load transfer and stress distribution across flanges.
| Brand Name | Luoke |
|---|---|
| Model Number | LK510, LK515, LK518, LK573, LK574 |
| Components | Single Component |
| Color | Green, Orange, Purple |
| Product status | Paste, Viscous Liquid |
| Cure System | |
| Handling cure time | 10min~30min, 5min-5hrs |
| Full cure time | 24hrs-72hrs |
| Package Type | LDPE bottle |
| Package Size | 250gr, 300gr, 50gr |
| Storage conditions | Cool, dark and dry location |
| Temperature range | -50°C~+150°C; -50°C~+204°C |
LK510(Loctite 510 equivalent):
Thixotropic viscosity, resistance to medium, good rigidity after curing. It is used for sealing of surface in high temperature conditions and sealing of flange with tightly assorted rigid structure. It can fill gaps up to 0.25mm.
LK515(Loctite 515 equivalent):
Universal type, thixotropic viscosity, flexibility of the adhesive layer, resistance to medium, no corrosion, low elongation. Adhesive softness is better than 510 after curing. It is used in sealing of flange that has only a little deformation when working. It can fill gaps up to 0.25mm. Typical applications: gearbox with large loading, drive axle plane sealing.
LK518(Loctite 518 equivalent):
Applicable to the aluminum surface, flexible flange. With flexibility and excellent solvent resistance.
LK573(Loctite 573 equivalent):
Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc. The thixotropic nature of LK573 reduces the migration of liquid product after application to the substrate.
LK574(Loctite 574 equivalent):
Fast curing orange paste gasket maker. Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc. The thixotropic nature of LK574 reduces the migration of liquid product after application to the substrate.
Parameters Sheet
| Item No. | Max. Bonding Gap (mm) |
Before curing | After curing | Curing Speed | ||||||
| Color | Viscosity (Mpa.s) |
Density (G/cm3) |
Shear Strength (Mpa) |
Breakaway Torque (N.m) |
Prevail Torque (N.m) |
Temperature Limitation (°C) |
Initial Strength (Min) |
Full Strength (H) |
||
| LK510 | 0.20 | Red | 13600 | 1.07 | ≧15 | 14 | 12 | -50~204 | 50 | 24 |
| LK515 | 0.50 | Purple | Paste | 1.10 | 8 | 10 | 5 | -50~150 | 120 | 24 |
| LK518 | 0.50 | Red | Paste | 1.10 | 8 | 10 | 5 | -50~150 | 120 | 24 |
| LK573 | 0.50 | Green | Paste | 1.25 | ≥5 | – | – | -50~150 | 120 | 24 |
| LK574 | 0.50 | Orange | Paste | 1.10 | ≥6 | – | – | -50~150 | 15-30 | 24 |
China Engineering Adhesive Manufacturer&Wholesaler.
We will contact you within 1 working day, please pay attention to the email with the suffix “@luoke.net.cn” and check spam box if necessary. As below 3 blanks are necessarily filled.
