Liquid Teflon Thread Sealant - Liquid PTFE Pipe Sealant
LK188 Liquid teflon thread sealant (Liquid PTFE, pipe sealant) is used for sealing metal threaded joints in home kitchen, air conditioning, bathroom and etc.
Advantages
- Single component, easy operation
- Room temperature curing
- Excellent sealing performace: two threaded surfaces full contact
- Stable: withstand vibration, high temperature and chemicals effect, after curing into elastic polymer tough for over 50 years.
- Disassemble: easy disassemble by hand tools while strength is enough for general threadsealing purpose
Specifications
- Color: red
- Cure time: fixture strength: 15min
- full strength: 24hrs
- Strength after full cure: 8 ~ 15 N.m
- Temperature: -50°C ~ +150°C
Directions for use
- For best performance bond surfaces should be clean and free from grease.
- Apply a 360°bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also.
- Using compliant practices, assemble and wrench tighten fittings in accordance with manufacturers recommendations.
- Using accepted trade practices, assemble and wrench tighten fittings until proper alignment is obtained.
- Properly tightened fittings will seal instantly to moderate pressures. For maximum pressure resistance and solvent resistance allow the product to cure a minimum of 24 hours.
Warnings
- This product is not suitable for conditions under pure oxygen, chlorine and strong oxidation material.
- This product is only suitable for metal threads, especially bronze, iron and etc.
- It is not advised to use on the pipe systems more than 150°C(if you desire this condition, contact us for other options).
- Don’t paste with bare hand, and clean with soap after finishing, otherwise it may cause allergic reaction.
- Do not pour leftover back in bottle for avoiding pollution.
In case of contact with eyes or skin, rinse with clean water immediately.
- Keep it away from easy-reach location of Children
Storage
Stored in a cool and dry location in unopened containers at 8~21℃. Shelf life is 2 years.
Client Testimonials
Why Us
- Top 5 Manufacturer in China for Anaerobic Adhesive
- Fast Online Response
- Much Faster Delivery Than Average
- Reliable Post-Sale Service
About Us
Ningbo Locke Glue Industry Co., Ltd. was established in year of 2007.
We are one of the several leading manufacturers in China who master well technology of anaerobic adhesive, vacuum impregnation sealant and pre-applied threadlocking & threadsealing adhesive and may be the unique producer of heat-curing wood stabilizing resin(vacuum) in China.
Other than the adhesives mentioned as above, we also produce UV glue, cyanoacrylate glue, metal repair epoxy putty, RTV silicone sealant, acrylic AB glue and etc depending on our customers’ requirements.
Certifications
With ISO9001, ISO14001 as guidance, our anaerobic adhesives passed tests of RoHS, REACH, SGS and etc.
